Anti Slip Perforated Walkway Grates Corrosion Proof for Pedestrian Safety

Anti Slip Perforated Walkway Grates are engineered pedestrian floor panels combining safety, corrosion resistance and long service life. Unlike heavy welded gratings, these perforated metal grates use precision punched holes in a load-bearing plate to deliver a uniform non-slip surface that drains water quickly, resists oil and debris accumulation, and provides confident footing in wet, oily or marine environments. They are ideal where pedestrian safety and low maintenance are priorities such as public walkways, stair landings, platforms and access bridges.

• Anti Slip Safety -- Perforation patterns plus optional raised dimples or grit coating deliver superior traction even when wet or contaminated.
• Excellent Drainage -- High open area options allow rapid water and debris passage preventing puddling.
• Corrosion Proof Finishes -- Hot dip galvanizing, stainless options or powder coats ensure long life outdoors and in marine atmospheres.
• Uniform Walk Surface -- Continuous plate design avoids tripping hazards sometimes found with bar gratings.
• Customizable -- Hole pattern, thickness, panel size, and edge treatment tailored to project needs.

• Reduces slip and fall incidents in public and industrial areas.
• Low maintenance -- debris does not lodge between bars and cleaning is straightforward.
• Lighter and easier to handle than equivalent strength welded gratings in some configurations.
• Fast installation with bolt-on panels or modular clamp systems.
• Aesthetic finish suitable for architectural walkways and visible platforms.

Pedestrian walkways, balcony decks, stair treads, rooftop access, pedestrian bridges, public plazas, transit stations, wastewater plants, food processing accessways, ship decks, petrochemical platforms and parking structures.

1. Raw sheet inspection and flattening.
2. CNC punching or laser perforation for precise patterning.
3. Edge folding or framing for safety and stiffness.
4. Surface treatment (galvanize/powder coat/anodize).
5. Load test and dimensional inspection.
6. Final clean, packaging and labeling. Certificates (MTR) and test reports available on request.

Panels can be fixed with countersunk bolts, clips or welded hangers depending on site preference. Leave minimal expansion gaps for thermal movement. Routine maintenance includes visual checks, pressure washing and reapplication of top coats if heavy wear is present. Replace damaged panels individually without removing entire runs.

Stacked with timber separators, wrapped in protective film and strapped to pallets or crates for sea freight. Small parcels sent on pallets; bulk orders palletized and banded. Typical lead time 10-25 working days depending on specification.